Radon Mitigation Cost in Colorado Springs: 2026 Guide

Straightforward pricing for the Pikes Peak market — what systems cost, what moves the number, and the guarantees worth requiring in writing.

Key takeaways

  • Typical Colorado Springs cost: $800–$2,000 for a professionally installed mitigation system.
  • Standard sub-slab system: $1,000–$1,500 for most homes with basements.
  • Complex homes: $1,300–$3,000 for difficult foundations, crawl spaces, or very high starting levels.
  • Testing first: DIY kits $15–$50; professional tests $150–$250.
  • Require in writing: a guarantee of reduction below 4.0 pCi/L and a minimum 5-year fan/workmanship warranty (per Colorado health officials).

Average radon mitigation cost in Colorado Springs

Most Colorado Springs homeowners pay $800–$2,000 for a professionally installed radon mitigation system. A standard sub-slab depressurization system in a home with a basement typically lands at $1,000–$1,500. Colorado's health department cites $1,000–$2,000 as typical statewide, with $1,300–$3,000 for homes with difficult designs.

ScenarioTypical costNotes
Standard sub-slab system$1,000–$1,500Basement home, single suction point — the most common job
Simple / accessible install$800–$1,200Easy pipe routing, straightforward electrical
Crawl space system$1,500–$2,500Sub-membrane depressurization + sealed vapor barrier
Complex foundation$1,300–$3,000Multiple suction points, very high starting levels
Activate passive system~$500If the home was built with passive radon piping, adding a fan

What drives the price up or down?

1. Foundation type

Basement homes are the simplest and cheapest to mitigate — one suction point through the slab usually does it. Crawl spaces need a sealed membrane plus the fan system, adding labor and materials. Slab-on-grade homes fall in between.

2. Number of suction points

Large footprints, additions built at different times, or interior footings that block airflow can require two or more suction points — each adds pipe, labor, and sometimes a second fan.

3. Pipe routing

Running the vent pipe through an interior chase (garage, closet) looks cleaner but takes more labor than a straight exterior run. Homes where the pipe must cross finished spaces cost more.

Electrical access — the fan needs power; a nearby circuit keeps costs down, while a long new run adds cost.

4. Starting radon level

Extremely high readings (20+ pCi/L) sometimes need a higher-capacity fan or additional sealing work to hit the guaranteed target.

Ongoing costs after installation

A mitigation fan costs roughly $75–$150 per year in electricity (about the draw of a continuously running 60–90 watt bulb) and fans typically last 5–10+ years; replacement fans run $200–$400 installed. Retesting every two years costs $15–$250 depending on DIY or professional testing.

Financial assistance for Colorado homeowners

Colorado's Low Income Radon Mitigation Assistance (LIRMA) program can cover mitigation costs for eligible low-income homeowners whose primary residence tests above 4 pCi/L. If cost is the barrier between you and a fixed home, check the Colorado Department of Public Health and Environment's program before delaying.

How to compare mitigation quotes

  • Licensed radon mitigation professional (verify via the state's lookup tool)
  • Written guarantee: levels reduced below 4.0 pCi/L
  • Minimum 5-year warranty on fan and workmanship
  • Post-installation testing included to verify results
  • Pipe routing and termination point specified (above roofline)
  • Electrical work included in the bid
  • At least three bids — pricing varies meaningfully between contractors

Get three quotes. Pick with confidence.

Free quotes from licensed Colorado Springs radon professionals — with the written guarantees that matter.

Get My Free Quotes or call (719) 555-0147

Price ranges reflect the Colorado Springs market as of 2026, consistent with publicly reported Colorado pricing. Every home is different — confirm with on-site quotes from licensed professionals. Last updated September 2026.